I need to borrow your truck to move a body.

You know you have a good friend when you ask to borrow his truck to move a body, and he just says that they keys will be in the glove box.

The body of the mini-vette has been moved to the shop so that it can be clearanced, and everything fit to look correct.

The engine and transmission now have a place to bolt to in the frame. They were setup to fit low enough in the body so that the tires will fit the wheel well and high enough to clear the axle. It looks pretty good, at least in my opinion.

I think I'll look for taller wheels for the front, and move the spindle up, so that the frame stays level.

In the back, I am planning on making some mini wheelie bars, since my vette will have them, and it will kind of hide the trans that shows below the body.

I wont have side pipes on mine, but may put them on the mini-vette to hide the frame from the side-view. If they are there, they should be functional, so that will also have to be taken into consideration.

I'll post some pictures later this week of the current progress.