Dash clearanced, airbag out, console in.....

I've cut out parts of the dash to clear the back of the LCD. There was about 1-2inches of plastic that had to be removed to clear the back of the LCD.

The airbag is out, and the dash bolted back together. It's ready to pull some wire through and relocate the heater controls and other switches. Still debating either cutting off the cover from the airbag, since it fits the dash already, or making a new piece. Anybody need an airbag?

The console is bolted in, and ready for wiring/finishing.

Someone decided to remove the plastic off of the lower LCD, so I taped some cardboard over it to try and protect it until the truck is done.