There is a donate link on the right side of the page now, so that you might participate in the projects. We are moving ahead on TuxBot!, updates to come soon. Your donations will help us allot the time to work on these projects, and maybe allow ou… more »

The underside of the seat has plenty of room for one amp, but the second amp would not fit stacked on top of the first. There is almost six inches of clearance at the front of the seat, but only about 3.5 at the rear. Each amp is around 2.5 inches tall,… more »

The carpet and vinyl showed up on thursday as predicted. After spending a somewhat large amount of time looking for the 1-7/8 hole saw to cut out the tweeter holes, I cut out the 5.25 speaker holes, and gave up on thursday. Friday I bought another 1-7/8… more »

The enclosure for the rear speakers has been glued and screwed. An MTX 5604 Amp has arrived, there is an issue with the 3404, so it will have to be repaired or replaced. I have ordered carpet and vinyl to cover the speaker enclosure and the center c… more »

With the stock truck jack being a nuisance more than a necessity, the space under the rear seat was going to go un-used. Well, not anymore. It will house two 12inch MTX 4500 series subwoofers. I have also procured an MTX 5604 Amp, and a 3404 amp to… more »

I have re-installed the rear side and back trim. The seat has been put in place, and now it's time to begin building the underseat box for the amp, sub, USB hub/dock, and any other item I can stuff into that area. more »